Call Me FreeCall Me Free Send SMS

Mipro-Pol Acid-Alkali Resistant Polyester Resin Base Mortar

Mipro-Pol Acid-Alkali Resistant Polyester Resin Base Mortar

Product Details:

  • Product Type Resin Base Mortar
  • Main Material Mipro-Pol Acid-Alkali Resistant Polyester
  • Usage Industrial
  • Supply Ability : 100-1000000 Kilograms Per Day
15.00 INR/Kilograms

Price And Quantity

  • 15.00 INR/Kilograms
  • 100 Kilograms

Product Specifications

  • Resin Base Mortar
  • Mipro-Pol Acid-Alkali Resistant Polyester
  • Industrial

Trade Information

  • 100-1000000 Kilograms Per Day
  • 1-7 Days
  • Asia, Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa
  • All India

Product Description

Leverages on the skills of adept professionals, we are providing an excellent range of Mipro-Pol Acid-Alkali Resistant Polyester Resin Base Mortar at feasible rates. It exhibits excellent adhesion to acid resistant bricks. Apart from this, provided mortar is a smooth spreading epoxy mortar. It is resistant to dilute acids. Mipro-Pol Acid-Alkali Resistant Polyester Resin Base Mortar is suitable mortar for joints filling dependent upon chemical exposure. It is suitable in commercial and chemical industries. 

INTRODUCTION: MIPRO-POL is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant bricks/tile, concrete, surface. MIPRO-POL is resistant to very wide range of chemicals. 

AREA OF APPLICATION: Due to very low absorption and very high chemical & physical properties MIPRO-POL can be used for acid resisting brick/tile lining, on floors, drains, reaction & storage vessels, sumps, effluent treatment plants of food/pharmaceuticals, Breweries, Dairies, Water treatment plants etc.  


Physical Properties 


Off white

Mix Ratio by wt. Sol to Powder


Compressive Strength kg/cm2


Flexural Strength kg/cm2


Bond Strength kg/cm2


Water Absorption


Max. Temp

90 C

Setting Time In Hours

8-10 Hrs.

METHOD OF APPLICATION: All mixing tools and pan must be clean, dry. Take appropriate quantity of resin and hardener and mix it thoroughly with suitable means, until you get homogeneous mix. Then add powder slowly in it and start mixing slowly to avoid air trapping. The ratio can vary depending upon ambient temperature and working conditions.

APPLICATION: After proper mixing of mortar should be buttered on back and sides of bricks/tiles to be laid. Apply little more mortar and after laying squeeze the excess mortar. If only a joint filling is to be done with MIPRO-POL, be sure that full depth of joints is filled with mortar. There should not be any air pocket in the joints. During & after completion of the installation, area must be kept dry and free from any other materials, traffic, which can affect setting & curing of MIPRO-POL

CHEMICAL RESISTANCE: MIPRO-POL is highly resistant to acids, salts, solvent oil and grease. Performance of MIPRO-POL in the presence of oxidizing chemicals makes it ideal for bedding & jointing material for use in the presence of chlorine and bleaching solutions, nitric and chromic acids. It is used widely in paper & pulp industries and electroplating plants. 

STORAGE & SHELF LIFE: Always keep resin, catalysts and powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed containers and bags; shelf life of Resin, Harder & Powder will be one year.

PACKING: Solution 10 kgs & powder 40 kgs.  

HEALTH & SAFETY: It is advisable to wear protective wears at the time of use of MIPRO- POL and all other MIPRO brand products. In case of contact with eyes & skin. wash with plenty of water and consult a doctor. Adequate ventilation of working are is recommended. 

This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control. 

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Acid Proof Cement Mortars' category

Back to top